Call for pricing and availability

Commercial and residential energy saving solutions

Your Key to Wireless Energy Management Systems

Product Description

The Entuit Door / Window Sensor helps provide energy savings for an area by detecting when a door or window opens or closes. It is a wireless solar-powered sensor that can be used on its own to detect the open and closed status of entry doors or windows, or it can be paired with Entuit's occupancy sensor to accurately detect whenever someone enters or exits a room. The sensor is easy to install on door and window frames, and virtually anything indoors that opens and closes.

ENTUIT WIRELESS WINDOR/DOOR SENSOR

ENDS

Features Include

Sends wireless message to other devices whenever a door or window opens or closes

Harvests ambient solar energy to power the sensor and send wireless communication

Mounts easily on standard doors or windows

Works with motion sensors to track room

occupancy and temperature control

Supplemental battery option for extreme low-light fail over

Discreet and low-proﬁle

Planning

Take a moment to plan for the sensor’s successful operation and optimal communication with other system components. Remove the sensor from its packaging and place it under a strong light to charge it for installation.

Ensure the location provides consistent and

adequate light

Install according to the alignment requirements

Determine which sensor proﬁle is appropriate,

see the Linking section

Consider the construction materials in the space

and obstacles that may interfere with RF signals

Alignment Requirements

SPECIFICATIONS

Power Supply Solar harvesting, supplemental battery option

Transmission Range 80 ft. (25 m)

Radio Frequency 902 MHz

Light Required to 15 lux for 6 actuations/hour

Maintain Operation 50 lux for 30 actuations/ hour

lOO lux for 60 actuations/hour

Charge Time to Setup 2.7 hours @ 10 lux

3.7 minutes @ 200 lux

Charge Time to 21 hours @ 2OO lux (after startuP)

Fully Charge 42 hours @ 2OO lux (cold start)

Fully Charged Operating 174 hours: heartbeat only

Life in Darkness 67 hours @ 10 actuations/hour

10 hours @ 1OO actuations/hour

Maximum Sensor Gap O.25 inch (6.4 mm)

Sensor Dimensions 3.15” L x O.83” W x O.59” D

( 8.O cm x 2.1 cm x 1.5 cm)

Magnet Dimensions 3.15” L x O.47” W x O.5” D

(8.Ocm x 1.2cm x 1.3cm)

Total Weight 0.97 oz. (27.5 g)

Environment -Indoor use only

- 32° to 131° F (0° to 55° C)

- 5% to 95% relative humidity

(non-condensing)

Agency Compliance FCC and I.C.

The proximity of the magnet to the sensor is important for proper detection. The alignment arrows on the sensor and the magnet must point to each other and the gap between them must not exceed .25 inch (6.4 mm) in any direction.

email - sales@entuitinc.com

SALES HEADQUARTERS:

1930 Baseline Road

Grand Island, NY 14072

CORPORATE HEADQUARTERS:

6881 Kingspointe Parkway, Unit 3

Orlando, FL 32819